GoFit Platinum GFELP01, Руководство пользователя

Страница: 18 / 24

15
Fig 5 Fig
6
2.
Set PROGRAM ：
If selected PROGRAM, then press UP & DOWN key to select
P01,P02,P03,P04……,P12 of the PROGRAM.
3. Set LEVEL of PROGRAM
：
Under START status, it can adjust LEVEL. When adjusting LEVEL,
▲
or
▼
key hasn’t cycle function(Press ▲ key can just increase to LEVEL 16, press ▼
key can just decrease to 1).
5. Adjust LEVEL of MANUAL ：
Under START status, it can adjust LEVEL of MANUAL. Press
▲
or
▼
key
to increase or decrease by 1 level. Press and hold it for 1.5 seconds, increase or
decrease by 2 levels every second. Release it will stop.
6. Adjust value(eg: TIME
、
DISTANCE
、
CALORIES
、
PULSE and so on )
：
i. Under MANUAL function, after selected TIME 、 DISTANCE 、
CALORIES
、
PULSE, press
▲
or
▼
key to adjust the values and
have cycle function.
ii. Under PROGRAM 、 User Program 、 H.R.C 、 WATT mode, you can
just set TIME.
iii. Press ▲ or ▼ key to increase or decrease by 1 level every time.
Press and hold it for 1.5 seconds, increase or decrease by 8 levels every second.
Release it will stop.
7. Select H.R.C. ：
If selected H.R.C. and AGE hasn’t been set, then first set AGE. Press MODE
for confirmation and then PULSE window will display the default value
calculated according to the age. If selected TARGET, PULSE window will
display 100 and be blinking. Press
▲
or
▼
key to set TARGET(30~240).
▲
or ▼ key has cycle function.
8. Select User Program
：
If selected User Program, user should press ▲ or ▼ key to set PROGRAM
figure(corresponding LEVEL value of every time axis). The setting step of the