5
Product Layout
Figure 1: Transmitter (TX)
1. Power LED
On when the Transmitter is powered on
2. Link LED
Connection status indicator LED. Refer to Link
Status Indicator on page 8 for details
3. HDMI In
Connects to your HDMI source device
4. Power Jack
Connects to the included power adapter
5. Antenna (x2)
Connects to the included antenna
6. Reset Button
Press and hold down for 5 seconds to reset the TX*
7. Micro USB
Firmware update port
8. IR Out
Connects to the included IR blaster cable
1
2
3
4
5
6
7
8
5
*
Note
: TX and RX pairing is required after a reset. See
Pairing Instructions on page 8.
