gofanco HDExt24-HD20, Руководство пользователя, Страница: 6 / 28

6
Figure 2: 2x4 HDMI 2.0 Splitter/Extender Rear Panel Layout
1 HDMI Input (1-2) Connects to an HDMI source device
2
HDMI/Loop Connects to a local HDMI display
CAT 6/7 Out (1-4)
Connects to the Input of the CAT 6/7 Receivers.
It supports PoC to power the receiver. The
orange LED illuminates when an HDMI signal
is detected. The green LED illuminates when
powered on
3
IR All In
Connects to IR Receiver cable. Sends IR signals
to all CAT 6/7 Receivers to control all the
display devices.
Connects to the IR Loop Out of the previous
Splitter/Extender for cascading
IR In (1-4)
Connects to IR emitter cable. Sends IR signals to
the respective CAT 6/7 Receiver to control the
display device
4
IR Out
3.5mm jack for controlling the source device
from the CAT 6/7 Receivers
IR Loop Out Connects to the IR All In port of the next splitter
RS232
Connects to the control PC using an RS232 cable
(cable not included)
FW USB Type-A port for firmware update
5
S/PDIF Audio Out
Toslink output for audio de-embedding from
the HDMI output
L/R Audio Out
3.5mm analog stereo audio output for audio de-
embedding from the HDMI output
6 DC 24V Connects to the included 24V power adapter