Goepel basicCAN 61 PLUS, Руководство пользователя

Страница: 11 / 37

Hardware
basicCAN 61 PLUS – User Manual 3-1
3 Hardware
3.1 Definition
The basicCAN 61 PLUS stand-alone device of GOEPEL electronic GmbH ,
based on the corresponding USB 6153 USB/ Ethernet board, should be
connected to a PC or laptop. It was developed for applications out of
complex test systems.
The external power supply of 7-25 VDC allows the use of this device
for data acquisition and the inspection of signals for a multitude of
applications, e.g. in motor vehicles.
basicCAN 61 PLUS provides the following resources:
♦
2 basic CAN interfaces
(4 CAN interfaces with optional CAN Extension board)
(see OnBoard Interfaces )
♦
optionally 2 further CAN/ LIN or K-Line interfaces onboard
(see OnBoard Interfaces )
♦
optionally 2 FlexRay nodes with 2 channels each
(see FlexRay Extension board )
♦
4 digital input and output channels with TTL level onboard
(see Digital IO )
♦
optionally 4 additional digital inputs and 4 outputs
with extended voltage range (see IO Extension )
♦
optionally 4 resp. 6 analog input and output channels
(see IO Extension )
♦
600MHz Power PC with 512MB RAM, 256MB Flash
♦
Communication interfaces and IO channels
are galvanically separated from the user interface
♦
High flexibility through pluggable transceiver modules and
possible variants of the IO Extension Board
♦
Control of the device via USB 2.0 or Ethernet
(see Addressing and Ethernet )
♦
1 Gbit Ethernet interface at the decice’s rear side also useable
as volume data and debug interface
♦
11 front panel LEDs for status indication (see Status LEDs )