22
4.3.4 Alarm input
When the equipment obtains the external alarm signal, the alarm function is turned on.
Set method: refer to chapter 4.3.1.
4.3.5 Alarm output
Refer to chapter 3.5.4.
4.3.6 Abnormality
Analyzing and inspecting current software and hardware of the device: When some abnormal events happen the device will make a relative answer such as show message
and buzzer.
[Event type
] Selecting abnormity you want to inspect.
[
Enable
] Select it to make sure abnormal function workable.
[
Show message
] Automatically alarm cue dialog box come out of the main screen.
[Buzzer
] Device will have two long “DI DI” while alarm is happening.
4.4 System setup
Set the system parameters such as general setup, code setup, network setup, network service, output mode, PTZ control, serial port setup and alternate patrol setup.
4.4.1 General setup
[
System time
] Set system data and time.
[
Data format]
Choose the data format: YMD, MDY, DMY.
[
Date separator
] Choose list separator of the data format.
Picture 4.12 regular setup Picture 4.13 summertime (week) setup Picture 4.14 summertime (data) setup
[
Time format
] Choose time format: 24-hour or 12-hour.
[
Language
] English or Chinese.
[
Hard disk full]
Choose stop: Stop recording when the hard disk is full.
Choose cover: Cover the earliest recording files and continue recording when the hard disk is full.
[DVR Number]
Only when the address button in the remote controller and the corresponding DVR number is matched, the remote operation valid.
[Video format]
PAL or NTSC.
Содержание Eyetrace Elite ET-8D12
Страница 1: ...USER MANUAL ET 8D12 Digital Video Recorder...
Страница 40: ...40...
