21
[
Channel number
] Choose the set motion detect channel.
[
Enable
] Means that the motions detect function is on.
[
Sensitivity
] Choose in the six options according to the sensitivity.
[
Area
] Click setup and enter the set area. The area is divided into PAL22X18. Green block means the current cursor area. Yellow block means the dynamic detect
defensive area. Black block means the unfenced area. You can set the area as followed. Drag the mouse and draw the area.
[
Period
] Trigger the motion detect signal in the set time section. You can set according to week or set uniformly. Each day is divided into four time sections. Means the set
valid.
[
Interval
] Only one alarm signal is turned on (even there are several motion detect signals) in the set interval.
[
Alarm output
] Start the external equipment of corresponding linkage alarm when the motion detect alarm is turned on.
[
Delay
] Delay a few moments and stop when the alarm state is turned off. The range is 10-300 seconds.
[
Record channel
] Choose the recording channel (multiple options supportive). Trigger the video signal when the alarm is turned on.
Note: Set in the [recording channel] and perform the linkage recording. Start detecting video files in the corresponding time section.
[
PTZ Activation
] Set the PTZ linkage when the alarm is turned on.
Note: PTZ linkage is set in the [shortcut menu] > [PTZ control]. Set the tour between spots, trail tour and so on
.
[
Show message
] Pop the alarm information dialog box in the local host computer screen.
[
] Means sending an E-mail to user when the alarm is turned on.
Note: Set in the [network service] and send an E-Mail.
4.3.2 Video Blind
When the video image is influenced by the environment such as bad brightness or reaching the set sensitivity parameter, the c amera mask function is turned on and the
linkage is turned on.
Set method: refer to chapter 4.3.1.
Picture 4.8 camera mask Picture 4.9 video loss Picture 4.10 alarm input Picture 4.11 Abnormality
4.3.3 Video Loss
When the equipment cannot obtain the channel video signal , the video loss alarm is turned on and the linkage function is turned on.
Set method: refer to chapter 4.3.1.
Содержание Eyetrace Elite ET-8D12
Страница 1: ...USER MANUAL ET 8D12 Digital Video Recorder...
Страница 40: ...40...
