Digital Video Recorder: User Manual
26
[Code stream value] Set the code stream value to modify the image quality. The larger code stream value the better image quality.
[Video/ Audio] When the icons are all in reverse displayed, the video file is video and audio multiplex stream.
Picture 4.10 network setup Picture 4.11 Encode setup Picture 4.12 PPPOE setup
4.4.3 Network setup
[Net card
] You can choose cable network card or wireless network card.
[DHCP enable
] Obtain IP address automatically.
Note
: DHCP server is pre-installed.
[IP address
] Set the subnet mask code. Default: 192.168.1.10.
[Subnet mask
] Set the subnet mask code. Default: 255.255.255.0.
[gateway
] Set the default gateway. Default: 192.168.1.1.
[Primary
DNS] [Secondary DNS]:
Domain name server, it translates the domain name into IP address. The IP address is offered by network provider.
The address must be set and reboot then it works.
[Media
port
] Default: 34567.
[HTTP port]
Default: 80.
[
HS download
]: The high speed download option can be enabled.
[
Transfer policy
]: There are three policies: Adaptive, quality preferred and fluency preferred. The code stream will adjust according to the setup.
Adaptive policy is the trade-off between quality preferred and fluency preferred policies. Fluency preferred and adaptive policies are valid only when the
assistant code stream is turned on. Otherwise quality preferred is valid.
4.4.4 Network service
Choose the network service option and click the set button to configure the advanced network functions or double click the service button to configure
the parameters.
