- 44 -
- 43 -
Attentions
1. Unable to trigger flash or camera shutter. Make sure batteries are installed correctly and
Power Switch is turned on. Check if the transmitter and the receiver are set to the same
channel, if the hotshoe mount or connection cable is well connected, or if the flash
triggers are set to the correct mode.
2. Camera shoots but does not focus. Check if the focus mode of the camera or lens is set
to MF. If so, set it to AF.
3. Signal disturbance or shooting interference. Change a different channel on the device.
4. Operating distance limited or flash missing. Check if batteries are exhausted. If so,
change them.
Caring for Flash Trigger
Avoid sudden drops.
The device may fail to work after strong shocks, impacts, or
excess stress.
Keep dry.
The product isn
'
t water-proof. Malfunction, rust, and corrosion may occur and
go beyond repair if soaked in water or exposed to high humidity.
Avoid sudden temperature changes.
Condensation happens if sudden temperature
changes such as the circumstance when taking the transceiver out of a building with
higher temperature to outside in winter. Please put the transceiver in a handbag or
plastic bag beforehand.
Keep away from strong magnetic field.
The strong static or magnetic field produced
by devices such as radio transmitters leads to malfunction.
Technical Data
X1T-F
FUJIFILM cameras
Support for the cameras that have PC sync socket.
2.4G Wireless transmission
MSK
2*AA batteries
Yes
TTL
Yes
Yes
Yes, ±3 stops in 1/3 stop increments
Yes
Manual open
Yes (Setting on the camera)
Max. 5 groups (A/B/C/D/E)
>100m
32
Model
Compatible Cameras
Builted-in remote system
Modulation mode
Power supply
Exposure Control
Manual flash
TTL autoflash
Multi flash
TTL Control
High-speed sync
Flash exposure compensation
Flash exposure lock
Focus assist
Second curtain sync
Wireless Flash
Controllable slave group
Transmission range (approx.)
Channel
