Godox X1T-F Скачать руководство пользователя страница 3

- 25 -

- 26 -

       

 Do not disassemble. Should repairs become necessary, this product must be 

       

 sent to an authorized maintenance center.

       

 Always keep this product dry. Do not use in rain or in damp conditions.

       

 Keep out of reach of children.

       

 Do not use the flash unit in the presence of flammable gas. In certain 

       

 circumstance, please pay attention to the relevant warnings.

       

 Do not leave or store the product if the ambient temperature reads over 50℃.

       

 Turn off the flash trigger immediately in the event of malfunction.

       

 Observe precautions when handling batteries

       

    Use only batteries listed in this manual. Do not use old and new batteries or 

       

     batteries of different types at the same time.

       

    Read and follow all warnings and instructions provided by the manufacturer.

       

    Batteries cannot be short-circuited or disassembled.

       

    Do not put batteries into a fire or apply direct heat to them.

       

    Do not attempt to insert batteries upside down or backwards.

       

    Batteries are prone to leakage when fully discharged. To avoid damage to the 

       

     product, be sure to remove batteries when the product is not used for a long 

       

     time or when batteries run out of charge.

       

    Should liquid from the batteries come into contact with skin or clothing, rinse 

       

     immediately with fresh water.

Warning

MODE Mode Selection Button

CH

/OK

 Channel 

Setting Button

GR Group Setting Button

Select Dial

Hot Shoe Camera 

Connection

LCD Panel

Names of Parts

Transmitter

Power Switch

--ON (Power On)
--OFF (Power Off)

AF Assist Beam Switch

--ON(AF Assist Beam outputs)
--OFF(AF Assist Beam do 
          not output)

Status Indicator Lamp 

--LED Red Color Lamp

TEST Trigger Button

Micro USB Port

PC Sync Socket

Battery 

Compartment

Single Hot Shoe 

Camera Flash 

Connection 

(only triggering)

Body

Содержание X1T-F














Отзывы: