separately).
*For the instructions of the power pack, see the related user manual.
Connecting the Flash to a Camera
1. Loosen the locking ring on the mounting foot.
2. Slip the mounting foot of the flash unit into the camera hotshoe.
3. Secure the flash unit by rotating the locking ring the direction of the row.
Replacing the Off-Camera Adapter
The off-camera adapter is useful when using the product as an off-camera flash. There is a 1/4″
mounting hole at the bottom of the off-camera adapter. To install the off-camera adapter,
1. Use a screwdriver (not included) to remove the four screws at the bottom of this product. Then
take out the bottom part carefully as illustrated.
2. Install the off-camera adapter at the bottom of this product.
3. Tighten all the screws.
Power Management
ON/OFF Power Switch (19) controls the on/off of the flash unit. Turn off the power pack if the flash
unit will not be used for an extended period (approx. 1 hour).
Flash Mode
—
E-TTL Autoflash
Disabling Auto Power Off function is recommended when the flash is used off camera.
(C.Fn-APO,
Page 22
)
