2、Setting <
>.
● Step 2 to Step 4 are set on the master unit.
● Press the Function Button 4 on the master unit so that <
> is displayed.
3、Setting <
RATIO A:B
>.
● Press Function Button 2 <
> so that <
RATIO A:B
> is displayed.
4、Setting flash ratio.
● Press Function Button 3 <
>.
● Turn the Select Dial to set the amount of flash ratio and press<SET> button to confirm.
5、Taking the picture.
● The slave units will flash according to the flash ratio.
Autoflash Shooting with Three Slave Unit
You can add firing group C to firing groups A and B. C is convenient to set lighting so as to
eliminate the subject’s shadow. The basic setting method is the same as “Autoflash Shooting
with Two Slave Unit”.
1、Setting the slave group <C>.
● Use the same method of step 1 to set the slave unit of flash group<C>.
2、Setting <
RATIO A:B C
>.
● Use the same method of step 2 and step 3 (see page **) to set the master unit as <
RATIO
A:B C
>.
3、Setting flash exposure compensation.
● Use the same method of step 1 to set the slave unit of flash group<C>.
● Press Function Button 2 <
>. Turn the Select Dial to set the amount of flash exposure
compensation and press<SET> button to confirm.
About Slave Group Control
