Channel
1~32
1~4
A/B/C Power
OFF，1/128~1/1
1/128~1/1
Other Applications
Wireless Control Function
The flash unit is built in with a Wireless Control Port so that you can wirelessly adjust the power
level of the flash and the flash triggering.
To control the flash wirelessly, you need a FT-16 remote control set (on-camera and on-flash).
Insert its receive end into the Wireless Control Port on the flash and insert the transmit end into
the camera hot shoe. Settings made on the hotshoe-mounted transmit and receive ends will be
wirelessly communicated to the flash. Then you can press the camera shutter release button to
trigger the flash. You can also hold the transmit end at hand to control your off-camera flash.
Modeling Flash
If the camera has a depth-of-field preview button, pressing it will fire the flash continuously
for 1 second. This is called modeling flash.
It enables you to see the shadow effects on the subject and the lighting balance. You can fire
the modeling flash during wireless or normal flash shooting.
For full instructions on the use of FT series remote control, see its user manual.
To avoid overheating and deteriorating the flash head, do not fire the modeling flash
for more than 10 consecutive times. If you fire the modeling flash 10 consecutive
times, allow at least 10 minutes’ break for the camera flash.
The modeling flash cannot be fired with the EOS 300 and Type-B cameras.
