Godox MoveLink M2, Инструкция по эксплуатации

Страница: 14 / 17

Optional Accessory
Technique Data
1. MoveLink Charging Case (Include USB Type-C Cable and a hand strap)
There are three charging bases in MoveLink, which can charge three transmitters or
receivers of MoveLink system after being connected to power supply.
Name Receiver RX Transmitter TX
Fixing Method
Back clip (installed onto camera’ s hotshoe )
Display OLED Display
Transmission Type 2.4GHz Frequency hopping system
Sound Pick-up Mode Omnidirectional
Equivalent Input Noise Level 21.8dB
（
A weighting
）
Frequency Range 50Hz-20KHz
Max. Output Electrical Level +3dBu
Single to Noise Ratio 70dB or higher
Sensitivity -32dB+/-2dB
Max. SPL 120DB
Dynamic Range 100dBA (microphone preamplifier)
Working Range 50m (in no shelter situation)
Power Supply Built-in lithium battery
Battery Life Approx. 6H
Battery Capacity 300mHa
Simulated Input 3.5mmTES Lavalier microphone input
Simulated Output 3.5mmTES
Working Environment Temperature -10~50
℃
Dimension Length 50mm × width 40mm × thickness14mm
Weight 27g
MoveLink M2 =TX+TX+RX
①
×2 +
②
×2 +
③
+
④
+
⑤
×2 +
⑥
+
⑦
+
⑧
+
⑨
N o t e : M o v e L i n k M 1 d o n o t
include MoveLink Charging Case
while MoveLink M1 includes a
MoveLink Charging Case.
MoveLink system has two charging ways:
A. being charged from USB Type-C cable;
B. being charged through MoveLink Charging Case.
MoveLink Charging Case Schematic Diagram of Charging
：
The indicator will display yellow during the charging process and turn to green when
being fully charged.
Charging Port
Charging Indicator