Godox MoveLink M2, Инструкция по эксплуатации

Страница: 12 / 17

2. Function Introduction
A. Power Switch: long press the power switch to power on or off. In
the state of power-on, if there is USB Type-C inserted, long press the
power switch to enter standby state and the charging animation will
be displayed. In standby state, long press the power switch to power
on.
B. Volume Adjustment:
(1) In dual sound setting mode, short press the “sound +/-”button to
increase or decrease the A/B transmitter’ s sound volume simultane-
ously
；
long press the “sound +/-”button to increase or decrease the
A/B transmitter’s sound volume gradually.
(2) Switch Channel: Short press the power switch button to separately adjust the
volume of “A channel”, “B channel” and “A&B dual channel”. The channel with
blinking figures can be adjusted volumes and will be switched to dual channel
adjustment if there are no operations after 3 seconds.
(3) In mono channel mode setting, short press or long press the “” to
increase the channel’ s volume gradually. If one of the transmitter’ s volumes is up to
maximum, the current volume slider can only be displayed instead of being
controlled
；
short press or long press the “volume -” to decrease the channel’ s
volume gradually. If one of the transmitter’s volumes is
up to minimum, the current volume slider can only be displayed instead of being
controlled.
(4) There are 16 levels of volume adjustment: 00db-15db.
Insert the 3.5mm lavalier microphone into the transmitter’ s 3.5mm audio port and
lock it tightly. Clip the transmitter onto the belt by back clip and clip the lavalier
microphone on the other end onto the collar. When using the external microphone,
the built-in microphone will be atomically turned off.
Using External Microphone:
Receiver (RX)
1. OLED Screen Displa
A channel transmitter’s battery level
B channel transmitter’s battery level
Sound channel selection display
A/B channel’s volume adjustment display
A/B channel’s soundbyte dynamic display
Connection or disconnection of A/B channel
Sound volume adjustment interface
Pairing interface Icon 1
：
Icon 2
：
Icon 3
：
Icon 4
：
Icon 5
：
Icon 6
：
Icon 7
：
Icon 8
：
C. Long press the pairing button to match the singles of transmitters. The left
channel will automatically receive A transmitter’ s singles while the right
channel will receive B transmitter’ s. Short press the pairing button to select
mono channel and stereo channel.
D. Charge the products through USB Type-C port directly. The charging
animation will be displayed in charging.
接收器-stereo 接收器-调节音量 接收器-A配对中
1 2 5 8
3 6 7 4