Godin 660125, Руководство пользователя

Страница: 9 / 16


The air that is used for combustion should be compensated for by allowing an intake (air-
vent) of fresh, external air into the room.
LIGHTING AND REGULATION

Open the door.

Using usual firelighting material (kindling, firestarters) and a small load of firewood, light the
fire. The air intake must be fully open.

Never use fuel or alcohol to light the fire.

If necessary, when lighting the unit, the door can be left slightly ajar for a few minutes –
under constant supervision.

When the fire is burning properly, the desired quantity of firewood can be loaded and the air
intake can be suitably reduced.

In cases where there have been extensive wet-works in the installation of the insert these
should be allowed to dry for 4 weeks. This will enable moisture in the possible brickwork
or stonework to evaporate.

To enable proper drying of the building works (after the 4 week period) small, moderate
fires should be lit for the first 10 days. The air register should not be opened fully during this
period in order to keep the fire intensity low.
Air Intake Adjustment:
Closed position for air intake Intermediate position of air intake Completely open position
REMARKS

During use, all material or objects that could be adversely affected by the heat should be
removed to a safe distance.

The air intake lever has two reference markings: “+” and “-“. “+” indicates higher air intake.
A normal operating position is indicated in the diagram above.
NOTE

When the heater is functioning normally the door handle must not be touched with a bare
hand. The glove provided should be used. The door must only be opened in order to load
more firewood or in order to remove the ashtray. The door must otherwise remain closed.

The door must be closed during normal operation.

Loading of firewood is done through the front door of the unit.