4
Connection to the chimney:
Example of connection of the chimney pipe
It should connect the device in accordance with the DTU 24.1. The safety distances between outer
walls of the flue pipe and chimney pipe of any combustible materials. (A) must conform to the
requirements of this standard. They depend on the particular type of duct, its thermal resistance, its
temperature class.
Instructions for the user:
-Before using the product, read the instructions and recommendations carefully.
-The unit can be equipped with an adjustable height grid for grilling.
-The device must be installed in accordance with national regulations in force in the country where it
is installed.
-It is recommended to be installed by a professional.
-Make sure the air intake is free from obstruction.
-The device must be connected to a chimney flue not serving other heaters.
-Never bring unauthorized modification on the device.
-The device is not planned to operate with an open door.
-All surfaces of the heater are active surfaces (hot), it is imperative to take all precautions to avoid
burns.
-Take all precautions to keep children and the elderly away to prevent accidents.
Ignition - adjustment:
-Always follow instructions
-During the first lighting of your unit, use small loads as to verify that the unit is functioning properly.
-Gradually increase the amount of logs over the next few days.
-Never use the heater as an incinerator.
- Only use the recommended fuel.
-Never use the unit with the door open
Содержание 325101
Страница 7: ...7...
