Godex EZ-2000 PLUS, Руководство пользователя

Страница: 36 / 78

7. Loose the lock bar (as shown on the
arrow 1) of the stripper.
8. Follow the direction of arrow 2 to flip
the stripper downward and open it.
1
2
9. Peel off a few labels from the liner
(about 400mm of liner), and then feed
the liner through the stripper.
10. Close the stripper and secure the lock
bar.
1
2
11. Wrap the liner around the Liner
Rewinder Shaft, and use the Paper
Clip to secure the liner.
12. Flip the Print Head Lever downward
and then push it back to the original
position.
【
Note
】
The label that used for stripping
is suggested to be at least 20mm in
height.
【
Suggestion
】
When printing with stripper
module, it is suggested to set the stop
position (^E) to 25.
1
2
13. Close the Top Cover and complete
the Stripper Module installation.
【
Note
】
Before starting to strip labels, please
send ”^XSET,REWINDER,1” command to
printer through QLabel or Hyper Terminal
for turning on the rewinder function.
EZ-2000+/6000+ User’s Manual
35