Godex EZ-2000 PLUS, Руководство пользователя

Страница: 17 / 78

2. Printer Installation
This printer model has the following print modes:
Thermal Transfer
(TT)
When printing, ribbon must be installed to transfer the print contents onto the
media.
Direct Thermal
(DT) When printing, no ribbon is necessary; it only requires direct thermal media.
Please check the specific print mode, and then go into the Setting Mode after power on the
printer
。
2-1. Label Installation
1. Place the printer on a
horizontal surface, and
open the top cover.
2. Follow
the sequence
and direction as the
figure shows, pull the
Print Head Lever out
and flip it upward to the
right.
2
1
3. Pull the Label
Alignment Guide to the
direction as the blue
arrow 1 indicates.
4.
Flip the Label Supply
Guide upward as the
blue arrow 2 indicates.
2
1
EZ-2000+/6000+ User’s Manual
16