Godex AG3000, Руководство пользователя

Страница: 32 / 46

32
RUN
Image 2: By pushing the START-button on the control unit you will bring the applicator from “STOP”
into “RUN” mode if:
• There does not occur an error in the applicator
• There does not occur an error in
the printer the screen will display
“RUN” and “READY”
!! In case only “RUN” is indicated you
cannot start a cycle. It means the
applicator head is not in its uppermost
position (start position). Check the
pneumatic cylinder in this case. Maybe
there is no air, or the sensor position is not
correct. The LED on the sensor must be
on!!
i: as soon as “RUN READY” is displayed
you can run a test cycle
Image 3: the display will show “ERROR”:
• In case an application cycle cannot
be completed after a predetermined
length of time (time out function)
Image 4: the display will show “ERROR PRINT”:
• In case the printer ran out of media
• In case the printer ran out of ink ribbon
• In case the print head is open
• In case no print file ready in printer buffer
i
: the control box can also deliver error
signals to auxiliary systems. See § 7.1 - §
7.3.
Image 5: by selecting the DOWN-arrow
you will enter the “SERVIS1” menu.
RUN READY
/
ERROR
ERROR PRINT