GodEngine ST-1002, Руководство пользователя

Страница: 49 / 72

49
by default and user wants to press “#” key from phone keypad to switch to VoIP mode
and redial contact’s Skype speed dial number, it might not work.
The displayed calling time will be the callee's PC local time and the time displayed
will also be decided by the phone supporting format and whether the phone supports
time display or not.
4.10 Make a Multi-Call
Make sure Multi-Call function is enable before making a Multi-Call and Multi-Call
function key is
“ ＊
1
”
. User can engage in a one-on-one talk with the maximum of 3
Skype contacts and one PSTN contact and switch between them by using the
function key
“ ＊
1
”
. Multi-Call can be done when user is making or answering a call.
Note: 1. In order to prevent possible troubles when user presses
“ ＊”
key during
a PSTN service call such as 800, we need user to start a Multi-Call from
a Skype call. User can’t make a PSTN call first and then add another
Skype contacts for a Multi-Call.
2. If user is calling a Skype contact with a voice mail on-going, the call
can't be reserved and user can press “
＊”
key to disconnect the call.
4.10.1 Make a Skype Multi-Call
1.
When a Skype call is undergoing, pressing the Multi-Call function key
“ ＊
1
”
will
put the current Skype call on hold. There will be a dial tone to inform user it is
time to add another Skype contact by dialing the speed dial number(followed by
“
#
”
key for an immediate call). The same procedure can be repeated until the
maximum of 3 Skype contacts have been added.
2.
User can also use the Skype window interface to make a Multi-Call. Then pick up
the phone receiver and wait for the contacts to proceed with the call.
3.
When there are more than two Skype users in a Multi-Call, user might hear a
busy tone for 5 seconds if the Skype contact doesn’t answer the call or hang up
during conversation. Then a Skype dial tone comes up and user can decide to
add a new contact or press “
＊
1” keys to switch to the reserved call. However,
there won’t be busy tone played if the reserved contacts hang up.
4. When user presses Multi-Call function key “
＊
1”, user needs to press key “1”
after key “
＊
” within 3 seconds. Otherwise the current call will be hung up
and won’t be reserved.