ENG
ENG - 53
Fig. 3
P5
d.c jack
P27 Power indication lamp
P33 Adaptor plug (d. c 24V 500mA)
ATTENTION!!! Recharges the battery without discharging it may cause the battery Malfunctio
-
ned.
After the battery is fully charged, it should be discharged before recharge.
* Discharge: Let unit operate for 20 minutes at least, such operation will discharge the batte
-
ry enough for recharge.
Recharges the battery more than 3 times without discharging it may cause the battery mal
-
functioned. Under such condition, please stop the charging process and put the unit away
from docking station, with its power on for an hour at least, then re-start the unit.
INSTALLING SIDE bRUShES
Turn counter clockwise to open the brush lids on the bottom of unit as shown in Fig.4.
Put the brushes on the holders then mount the brush lids back by turning clockwise as
shown in Fig.5.
The brushes will be radiative after completing installation as shown in Fig.6.
Fig.4
1)
2)
1)
2)
3)