Goddess Bibione 1, Инструкция по эксплуатации

Страница: 7 / 16

ENG
ENG - 33
8) Align the right board with bottom board’s corresponding battens; make sure right board fits
flush into backboard and latch together. See FIG-7.
FIG-7 Assembling right board FIG-8 Assembling sitting board
9) Put the sitting board horizontally on corresponding battens of the backboard.
See FIG-8.
FIG-9
Assembling front board
FIG-10
Setting the top board
10) Align the front board (section 3) with bottom board’s corresponding battens, and then latch
it with the left and right boards respectively. Notes: Take caution of the glass door to avoid
damage. See FIG-9.
11) Put the wires of front board and backboard into the cabinet to avoid pressing the wires
during installing. See FIG-10. Open the door, raise the top board high enough to see if it fits
with the surrounding boards, then put down.
FIG-11 Leading the wires of heaters
onto the board through the corresponding hole
12) During the course of putting down the internal top board, make sure all the wires (mentioned
above) and connecting plugs are slipped through the corresponding holes of the top board.
All these wires will be led into connecting with the controller on the internal top board.
See FIG-11.