Step 2
Step 3
Lower
Extension
Arm
Upper
Extension
Arm
Nylon
Washer
Flat
Washer
Flat
Washer
Flat
Washer
Flat
Washer
Nylon
Washer
Locknut
Locknut
Extension
Arm Bolt
1
/
2
” Nylon Washer (8)
6
Step 3:
Attach upper extension arm pivot holes
with upper holes in pole
following the same hardware and
procedure as in Step 2.
Step 4:
Remove protective material from extension arms.
extension arm attachments
WARNING
Two or three people in good physical condition and capable of
lifting at least 90-100 lbs. (40-45 kg) each are recommended
for safe installation and assembly.
TIME OUT TIP:
The lower extension arm is the
longer of the two arms.
Step 1:
Unpack extension arms.
Align lower extension
arm pivot holes with lower bushings on pole.
Step 2:
Attach lower extension arm pivot holes with
lower bushing on pole
using the following: one
1
/
2
” x 8” bolt,
two flat washers, four nylon washers and a locknut. Tighten with
3
/
4
” wrench and socket so the bushings on the extension arm
meet the bushing on the pole. Do not over-tighten.
1
/
2
”
Locknut (2)
1
/
2
”
x
8” Extension Arm Bolt (2)
1
/
2
” Flat Washer (4)
HARDWARE:
TOOLS:
3
/
4
” Socket,
3
/
4
” Wrench, Rubber Mallet