8
Step 3
Backboard
Bolt
Locknut
Flat
Washer
Flat
Washer
Flat
Washer
Step 2
WARNING
Two or three people in good physical condition and capable of
lifting at least 90-100 lbs. (40-45 kg) each are recommended for
safe installation and assembly.
IMPORTANT
The installation clip
MUST
be in place to maintian the proper
installation angle.
TIME OUT TIP:
Lay the unopened box with
Goalsetter logo upside down AND let the lid
open up and fold away from the goal system.
Step 1:
Open lid of box containing backboard
and slide
the backboard face down under lower extension arm, with rim
mounting plate facing towards goal system.
TIME OUT TIP:
The backboard attachment can be
eased by cranking the jack to help align lower
extension arms above the backboard prior to lifting it.
Backboard attachment
Step 2:
Carefully lift the bottom of the backboard
to
align lower backboard holes with lower extension arm
holes.
Using ratchet and wrench, attach backboard to arm using
the following hardware: two backboard bolts, four flat washers
and two locknuts.
NOTE:
This is a pivot point!
DO NOT
over-
tighten. Snug tighten only.
Step 3:
Lift top of backboard to align upper holes
with upper extension arm holes
using the same hardware
and procedure as in Step 2.
1
/
2
”
Locknut (2)
1
/
2
”
x
8”
Backboard Bolt (2)
5
/
8
”
Flat Washer (4)
HARDWARE:
TOOLS:
3
/
4
” Socket,
3
/
4
” Wrench
