1. First, make sure all male clips have been disconnected from their
corresponding clips. Carefully lift the bottom tube of the Yard Guard
upwards and toward the net. Gather the excess netting to the pole
with one hand while using the other to grab the top
storage Strap
with the Plastic Clip
. Simply bring the
Strap with male Plastic
Clip
around the front and outside of the Yard Guard and connect the
female Clip, located on the back on the pole pad See Figure 4-6, Side
View and Back View. Connect the other four straps in the same
manner. Repeat this same procedure on the other side.
Storage instructions
4L-8156-00
WARNING
!
NOTE
: Straps will be tight. This will help to secure
and Protect the Yard Guard.
Figure 4
Figure 5
Figure 6
4L-8156-00
WARNING
!
4L-8156-00
WARNING
!
4L-8156-00
WARNING
!
Detail 12
Female
Plastic
Clip
Plastic
Clip
Male
Detail 13
Strap with
Plastic
Clips
Detail 14
FRONT OF POLE
FRONT OF POLE
12
