15
Tape
Raise Backboard to 10 FT. regulation playing
height. Measure from top of rim straight down to
the playing surface.
Using tape - mark the
side
of the steel actuator
(#16) just under the plastic actuator sleeve (#15)
at this 10 ft rim height. See
Figure 13
.
Lower backboard all the way down. Do not force
actuator once backboard is in it's lowest position.
See
Figure 14
.
21.
22.
23.
24.
25.
Remove the adhesive backing from the Height Decal
(#17). Next, carefully align and stick decal to
backside of steel actuator (#16) starting at the
10 ft
mark first
. Be sure to keep the height decal straight
and rub out all air bubbles. See
Figure 15
.
17
16
Figure 15
Lowered all
the way down
Tape at 10
feet
Figure 14
Figure 13
Set at 10 feet
Mark with
tape
15
Do not
remove adhesive backing from height decal
(#17) yet. Carefully place height decal on backside of
steel actuator (#16) and line up the 10 ft mark on the
tape with the 10 ft mark on the height decal. Decal
should fit correctly onto the backside of the steel
actuator. ( If not , simply trim to fit the top of the
actuator decal).
13
Содержание B3200W
Страница 2: ...2...
