Figure 12
If further leveling is required loosen
top #35 nuts but do not loosen past
the top of #39 “J” Bolt.
DO NOT
REMOVE NUTS #35
Place a
.
level on pole and adjust bottom nuts
#35 with a 15/16” open end
wrench until pole is level. Tighten
top #35 hex nuts. See
Detail A
.
20.
Figure 11
Detail A
35
39
35
(Bottom)
17.
Mount Goal Assembly (#28) to Backboard, as shown in
Figure 11
, using four bolts (#29), four washers (#26), and
four locknuts (#33). Tighten fasteners, but leave them loose
enough to level rim.
16.
18.
19.
Place a level across rim assembly and adjust rim
until it is level. Finish tightening the four
nuts (#33).
Attach Rim Cover Plate (#31) using four
screws (#32). See Figure 11.
Check all nuts and bolts to make sure
everything is tightened properly.
DO NOT
over tighten
pivot points, snug is tight
enough.
12
NEVER USE RIM WITH
COVERPLATE REMOVED!
Two adults are recommended for this step, one
to level and one to adjust the bottom #35 nuts.
NOTE:
Содержание B3200W
Страница 2: ...2...
