6
REV.01
INSTALLATION INSTRUCTIONS
© 2016 Go Rhino Products. All rights reserved
Step-6 Assemble and attach each main and clamp bracket to the impact beam using (4) 3/8” X 1 1/4”
hex bolts, (8) 3/8” flat washers, (4) 3/8” lock washer and (4) 3/8” hex nuts, (Fig 5).
Step-7 Position each main bracket and clamp bracket assembly, so the outer edge of the clamp bracket
is approximately 18 5/8” from the end of the impact beam and tighten the nuts and bolts, (Fig 5).
Step-8 Reinstall the impact beam using the OEM Bolts, and tighten the OEM bolts, (Fig 6).
18 5/8”
Fig 5
Fig 6
G-H
I-J
D
E
G-H
I-J
Driver Side
