ON/OFF and forward/reverse
changeover switch (3)
You can select between clockwise and counter-
clockwise rotation. Change the direction of rotation
only when the screwdriver is at a standstill. If you fail
to observe this point, the gearing may become
damaged.
Lighting (1):
The lamp (1) enables the work area to be illuminated
in unfavorable lighting conditions. You can switch on
the lamp with the switch (5).
Angle setting
The screwdriver can be locked in 3 different angle
settings. To do so, press and hold the locking button
(7) and move the screwdriver into the desired
position. Then release the locking button (7).
Important! Before you switch on the screwdriver,
make sure that it is correctly locked in the angle
position in question.
Screwdriving
We recommend using self-centering screws (e.g.
Torx screws, recessed head screws) designed for
reliable working. Be sure to use a bit that matches
the screw in shape and size.
6. Technical data
Voltage supply
4,8 V d. c.
Speed 0-200
rpm
Forward and reverse rotation
yes
Battery charging voltage
6 V d. c.
Battery charging current
300 mA
Mains voltage for charger
230 V ~ 50 Hz
Sound pressure level L
pA
63,9 dB
Sound power level L
WA
74,9 dB
Weight
0,4 kg
Vibration a
hv
< 2,5 m/s
2
7. Cleaning, maintenance and ordering
of spare parts
Always pull out the mains power plug before starting
any cleaning work.
Cleaning
앬
Keep all safety devices, air vents and the motor
housing free of dirt and dust as far as possible.
Wipe the equipment with a clean cloth or blow it
with compressed air at low pressure.
앬
We recommend that you clean the device
immediately each time you have finished using it.
앬
Clean the equipment regularly with a moist cloth
and some soft soap. Do not use cleaning agents
or solvents; these could attack the plastic parts of
the equipment. Ensure that no water can seep
into the device.
Maintenance
앬
There are no parts inside the equipment which
require additional maintenance.
Ordering replacement parts
Please quote the following data when ordering
replacement parts:
앬
Type of machine
앬
Article number of the machine
앬
Identification number of the machine
앬
Replacement part number of the part required
For our latest prices and information please go to
www.isc-gmbh.info
8. Disposal and recycling
The unit is supplied in packaging to prevent its being
damaged in transit. This packaging is raw material
and can therefore be reused or can be returned to
the raw material system.
The unit and its accessories are made of various
types of material, such as metal and plastic.
Defective components must be disposed of as
special waste. Ask your dealer or your local
council.www.isc-gmbh.info
7
GB
Anleitung AS 4_8 V_SPK7:_ 03.05.2007 13:26 Uhr Seite 7