Several chambers always
remain inflated at the
same time, which prevents
backflow. This is why the
“Intense Flow” setting also
helps to remove lactate
quite intensively. This
program is suitable for a
quick but intensive
recovery session of
between 10–20 minutes.
“Impulse” is intended for
20–30 minute sessions. Since
all chambers are pumped up
at the same time in a pulsed
manner, “Pulse” maximizes
the number of possible
compression cycles in a given
time.
The continuous pressure of
Program B prevents backflow.
Therefore, Program B is
primarily intended to remove
lactate for approx. 20–30
minutes. As a beginner, you
should build up to this program
slowly and only after you have
first used Program A for a while.
Before your chosen
program/sequence starts, you
should make sure that the leg cuffs
are optimally adapted to your legs
and fit ergonomically. To do this, all
chambers are filled with air at the
same time for 2 minutes. Then your
program/sequence starts. The
feature will only be activated for a
single session directly after starting
the control unit, and it can only be
reactivated again by restarting the
device.
Do not interrupt the initial phase by changing the program or switching
off the device. Otherwise, chamber pressure may accumulate and make
it uncomfortable for you.
14
Содержание 3281909
