Page 27
Confirmation for subsidy
We hereby confirm that our product go-eCharger HOMEfix 11 kW or go-
eCharger HOMEfix 22 kW has the following product characteristics:
Ÿ
ICCB (In-cable control box) with 2 meters cable and type 2 socket
Ÿ
3-phase 16 A charging power max. (version with 11 kW) or
3-phase 32 A charging power max. (version with 22 kW)
Ÿ
Residual current protection mechanism with AC+DC detection according
ÖNORM IEC 62752.
Ÿ
Load balancing via App
Ÿ
Smart home capable due to MQTT connection
Ÿ
Smart grid capable through connection to aWATTar
Ÿ
Recording of charging energy (kWh), total and broken down by RFID card
Ÿ
Modbus TCP (firmware version 0.40 or higher) and go-e network operator
API for authorised access of the electricity network operator to the go-
eCharger for network related power control
You can find more information about the product on our website:
www.go-e.co/?lang=en
Product image:
GmbH
M a i l : o f fi c e @ g o - e . c o
T e l : + 4 3 4 2 7 6 6 2 4 0 0 1 0
www.go-e.co
g o - e G m b H
S a t e l l i t e n s t r a ß e 1
A T 9 5 6 0 F e l d k i r c h e n
Warranty
Page 26
The statutory liability for defects law and the statutory warranty period of two years
shall apply. After six months from delivery of the goods, the burden of proof of the
statutory warranty shall pass to the customer. Shipping costs for repeated repairs
due to technical defects by the manufacturer shall be borne by the manufacturer.
In the event of incorrect installation, improper use or incorrect connection or
connection to incorrectly installed electrical connections and the resultant damage
to the product by the purchaser or other technical defects caused by the purchaser,
the warranty shall lapse or a reduction in value shall be made. In this case the buyer
bears the shipping costs. This applies in particular if the product is operated with an
energy source not recommended by the manufacturer for the product or used for
purposes other than those specified by the manufacturer. The warranty also expires
in the event of any modification or opening of the system by unauthorized persons,
whereby only persons recognized by the manufacturer are to be considered as
authorized. In case of doubt, consult the manufacturer.
