8
Using the spring pin buttons and
adjustment
holes
in
the
telescoping legs, adjust the height
of the
rolling
frame assembly
so
that the occupant may safely and
comfortably transfer to the “GO-
Anywhere” Chair™
.
This may
involve some trial and error.
Ensure that the frame will fit over
the
commode
as
well,
if
necessary. Make sure that each
telescoping leg is secure with a spring pin button protruding
through one of the adjustment holes.
The front legs may be extended to
be longer than the rear, resulting in
additional rear lean. The camber
built into the legs provides added
stability. (If you choose to add rear
lean, be sure to test the chair
BEFORE USE to ensure that it will
not tip over backwards.)
Individuals
having limited upper body strength
and/or balance will find themselves
more comfortable with the additional
rear lean
.
6.
Remove both
cross-braces
from the zippered accessory
bag. Loosen the black knobs allowing each
cross-brace
to unfold.
There are left and right
cross-braces
. Install each
cross-brace
by placing its keyway over the protruding bolt head of its
corresponding leg as indicated by the colored dots. Align the
groove of both long and short sections and draw them together,
pulling the front and rear
legs w/ swivel casters
toward one
another. Tighten the black knobs to secure them.
Step 5
Cross-braces
