Gnet G-ON4, Руководство пользователя

Страница: 4 / 64

Overtime, memory degradation can occur and should be replaced
periodically.
To prevent incompatibility problems, please use only a genuine GNET
memory card. The GNET memory cards are speci fi cally designed to operate
with our GNET systems and are covered under our warranty program.
When a vehicle accident occurred, it is recommended to remove the
memory card from the device and save the data to a computer
immediately. When the memory card is full, the data will be overwritten,
and the accident data will be lost.
Please be sure to remove the memory card only after the recording LED is
o ff . Otherwise, if removed too early, video data could be lost or corrupted.
This can also shorten the card’s lifespan.
Please do not interchange / swap the memory cards between other
products. Data may be erased and lost if the memory card is automatically
formatted.
It is recommended that the memory card be formatted at least twice a
month for product and lifespan maintenance. For best results, please use
the o ffi cial SD Formatter (www.sdcard.org).
GNET System dash cameras can support memory card (SD) capacities
ranging from 8GB to 1TB.
When a new or used memory card is inserted into the device for the fi rst
time, the system will go into standby mode for 3 to 5 minutes. Please do
not attempt to remove the memory card during standby mode or when the
device is formatting the card.
It is possible to format the memory card in the GNET application for Mac
and PC. Please visit the GNET SYSTEM’s website at:
https://www.gnetsystem.com/eng
→
SUPPORT
→
DOWNLOAD
02
01. BEFORE USE
CAUTION
FOR MEMORY CARD