27
Problem
Probable Cause
Solution
- The autoclave doesn’t
switch on.
- The cord is disconnected.
- Power cut.
- Burnt fuse(s).
- Bad contact in the socket.
- Connect the cord to the
socket.
- Wait until energy is back.
- Replace fuse(s).
- Replace socket.
- The autoclave can’t reach or
maintain the pressure high.
- Temperature range different
from pressure based on the use
of the gauge and thermometer
indicative colors.
- The voltage supplied is lower
than the one required by the
autoclave.
- Leakage in the safety seal.
- The door latch isn’t in posi-
tion, causing leakage.
- Not enough water.
- Overloaded chamber.
- An electrician must check and
adapt the electricity supply.
- Disconnect the autoclave,
and remove the safety seal
and the anti-vacuum valve,
clean them and place them
again. If it were necessary,
replace them.
- Place the door latch pushing
it downwards.
-Check that the volume of
water is the specified.
- Use up to 70% of the cham
-
ber, leaving spaces between
the packages.
- The autoclave’s door can’t
be opened.
- The autoclave isn’t yet de-
pressurized.
- Wait the autoclave depres-
surization.
Upon coming across any problem in operation, follow the instructions below to check and
repair the problem, and/or get in touch with your representative.
UNFORESEEN EVENTS – SOLUTION OF PROBLEMS
FINAL CONSIDERATIONS
Among the care you have to take with your equipment, the most important is regarding of the spare
parts replacement.
To ensure the lifetime of your device, only replace original spare parts. They have the assurance of the
standards and technical specifications required by the Gnatus representative.
We call your attention to our authorized resellers’ chain. Only this chain will keep your equipment
constantly new, because it has trained technical assistant and specific tools for the correct maintenance
of your device.
Whenever you need, demand the presence of a Gnatus’ technician from the nearest resale, or ask
through the Attendance Service Gnatus: + 55 (16) 3512-1212.
EQUIPMENT’S WARRANTY
This equipment is covered by the warranty terms and norms contained in the Warranty Certificate
that accompany the product.
