GMX RIDER X Скачать руководство пользователя

Страница: 7 / 20

22. Always use the correct size and type of tires specified in this manual. Always maintain proper tire pressure as described in

this manual.

23. Never modify an OFF ROAD VEHICLE through improper installation or use of accessories.

24. Never exceed the stated load capacity for any GMX Motorbikes product.

25. Ensure the safe handling of ANY petrochemicals required for the maintenance of your GMX product.

26. GMX Motorbikes will not be held responsible for violations of local road laws, GMX range of OFF ROAD VEHICLE are

designed solely for private, off road usage unless otherwise stated.

EXHAUST SYSTEM

GMX Motorbikes advise that the exhaust on the machine can become very hot during and following operation. To prevent

burns, avoid touching the exhaust system. Park the machine in a place where Pedestrians or children are not likely to come

in contact.

FUEL HANDLING

Precautions should be taken when handling any type of petrochemicals. Gasoline can catch fire, and is toxic to life and the

environment. GMX motorbikes recommend the following safety tips to avoid accidents, injury/death:

- Always turn off the engine when re-fuelling. Do not refuel right after the engine has been running and is still very hot.

- Do not spill gasoline on the engine or exhaust pipe/muffler when refuelling.

- Never refuel in any proximity to any sources of ignition such as smokers, open flames or embers etc.

- When transporting the machine in another vehicle, be sure it is kept upright and that the fuel cock is in the “OFF” position.

Otherwise, fuel may leak out of the carburettor or fuel tank.

- Gasoline is poisonous and can cause injuries, in the case of swallowing gasoline, inhaling gasoline vapours or contact with

eyes, see your doctor immediately.

- In the case of gasoline contact on your skin, wash with soap and water. If gasoline spills on your clothing, change your clothes.

Содержание RIDER X





















Результаты поиска

Содержание RIDER X

Отзывы:

Похожие инструкции для RIDER X

Бренды по названию

Популярные бренды

GMX RIDER X, Инструкция по сборке

Результаты поиска

Содержание RIDER X

Отзывы:

Похожие инструкции для RIDER X

Бренды по названию

Популярные бренды