GMX RIDER X Скачать руководство пользователя

Страница: 13 / 20

The carburettor is also considered part of the throttle system and may also require adjustment. It is not advised to make

adjustments whilst the engine is running. Repeat adjustments whilst the engine id off and test each adjustment afterwards.

To adjust the carburettor:

- Support the vehicle by means of the side stand

- Adjust the idling speed using the adjustment screw (recommended r/min are aprox. 1500 r/min)

PLEASE NOTE:

Do not make adjustments to a cold engine as this is the most changeable state of the engines running.

Adjustments should not be made by unqualified persons, if in doubt please consult a qualified mechanic.

CHAIN

It is advisable to visually check the chain of your OFF ROAD VEHICLE before each use. Its general condition is important, there

should be no obstructions to the chain, it should be well lubricated and under the correct tension

LIGHTS

Should your OFF ROAD VEHICLE include front/rear lights or signalling lights, it is important to ensure these are in good
working condition prior to using your OFF ROAD VEHICLE

SWITCHES

Any switches included with your vehicle can be very important to the control of the OFF ROAD VEHICLE ; these should be

checked prior to every use of the vehicle.

TIRES

GMX Motorbikes advise that you should check the condition and wear of your tires before every ride. Tire pressure should be

check intermittently Tires can be damaged by rough terrain

In the event of any discrepancies or faults discovered during your safety checks, please contact an approved mechanic.

Содержание RIDER X





















Результаты поиска

Содержание RIDER X

Отзывы:

Похожие инструкции для RIDER X

Бренды по названию

Популярные бренды

GMX RIDER X, Инструкция по сборке

Результаты поиска

Содержание RIDER X

Отзывы:

Похожие инструкции для RIDER X

Бренды по названию

Популярные бренды