manualshive.com logo in svg

GMX RIDER X, Инструкция по сборке

Поделиться
Скачать
GMX RIDER X Скачать руководство пользователя страница 14

GENERAL CLEANLINESS

The cleaning of your vehicle can prolong the life of many component parts such as, plastics brakes and frame etc. Jet washing can 

cause damage to certain components.

PLEASE NOTE:

 Some cleaning chemicals can remove oils and lubricants that are vital to the running condition of the OFF ROAD 

VEHICLE . It is highly recommended that all lubricated areas are treated with the correct lubricants. Do not use corrosive 

detergents for the cleaning of the vehicle. Brakes can be rendered ineffective if wet or contaminated with detergents, please 

allow for drying time prior to reusing the vehicle after cleaning.

GMX Motorbikes promote the use of safety equipment during the use of your OFF ROAD VEHICLE; the following list is an 
advisory guideline of the equipment that should be obtained before using your OFF ROAD VEHICLE  for the first time, and to be 

used for every ride regardless of experience and skill level.

HELMET

A helmet is the most important piece of protective equipment and should be worn at all times the vehicle is being ridden.

– Select a helmet that complies with Australian Standards

– Ensure the helmet fits the operator snugly, is securely fastened and provides good,

all-round visibility. A poorly-fitting or loose helmet can become dislodged in an incident and then offer no protection at all.

– Operators should not share helmets but instead use personal helmets for size and hygiene reasons.

EYE PROTECTION

Eye protection is recommended to prevent eye injuries and prevent branches, bugs, dust or sand hitting your face and 

distracting you. Sunglasses are unlikely to provide adequate physical protection. 

Содержание RIDER X





















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды