www.g-mw.de
16
The Ni-MH batteries can be affected by a memory effect. To counteract this, you should discharge the
batteries completely roughly once a month.
• The „Discharge battery“ function can be found on the Connection menu of the TG Basic 2+.
• Press the
button to start the discharge process; the screen switches off, the relays switch on and
the red LED flashes. The charging process starts automatically as soon as the batteries are completely
discharged
• The maximum discharge period is 5 hours
• The maximum charge period is 10 hours
The device must be supplied with power at all times during the discharging and charging process!
• When the device has been charged 20 times (without previously discharging it fully), a message
appears prompting you to discharge the battery.
Display of the charging state: ‘Charge!’ is shown on the display when the device needs charging.
7.3
Starting the test
The individual tests can be selected via the direct selection buttons. Optionally, tests can be performed
automatically via the Bluetooth connection using the
Test-Master app
in remote mode.
