34
Remote control battery information
This remote control uses two AAA batteries (not included).
NEVER throw batteries into fire. Failure to observe this precaution can result in an explosion. Dispose of
batteries at your local hazardous materials processing center.
Temperature Limiting Control
This heater is equipped with a Temperature Limiting Control. Should the heater reach an unsafe temperature, the heater
will automatically turn OFF. To reset:
1.
Unplug the power cord from the outlet.
2.
Turn the ON/OFF switch on the CONTROL PANEL to OFF. Wait 5 minutes.
3.
Inspect the fireplace to make sure no vents are blocked, or clogged with dust or lint. If they are, use a vacuum to clean
the vent areas.
4.
With the POWER switch in the OFF position, plug the power cord back into the outlet.
5.
If the problem continues, have your outlet and wiring inspected by a professional.
Cleaning
ALWAYS turn off the heater and unplug the power cord from the outlet before cleaning, maintaining or
moving the fireplace. Failure to do so could result in electric shock, fire or personal injury.
NEVER immerse in water or spray with water. This could result in electric shock, fire or personal injury.
• Metal:
Polish with a soft cloth, slightly moistened with a citrus oil based product.
DO NOT use brass polish or household cleaners as these products damage the metal coating.
• Glass:
Use a good quality glass cleaner sprayed on the cloth or towel. Dry thoroughly with a paper or lint-free cloth.
NEVER use abrasive cleaners, liquid sprays or cleaners that could scratch the surface.
• Fans:
Use a vacuum cleaner or duster to remove dust and dirt from the heater and fan areas.
• Plastic:
Gently wipe with a slightly damp cloth and a mild solution of dish soap and warm water.
NEVER use abrasive cleaners, liquid sprays or cleaners that could scratch the surface.
Risk of electric shock! DO NOT OPEN any panels. There are no user serviceable parts inside!
