26
Wall Mounted Installation
You need (no included):
Start the installation
•
Position the Wall support on the wall and mark where the 5 screw holes will be. (you can use the gradienter to make
sure the wall bracket is level ).
•
Use an electric drill and drill bit to drill 5 screw holes.
•
Drive the 5pcs Drywall anchors Ø6x35 into the holes in the wall with a wooden hammer.
•
Then hang the Wall support again and lock them in with 5pcs 4.2*40mm screws.
•
Recommended Wall support are installed at least 1000mm above the ground.
•
Have two people hold the appliance and lift the heater and carefully lower it onto the mounting bracket, ensuring that
bracket and heater are firmly engaged
•
Fix the Wall bracket under the fireplace with the screws of 2pcs 3.5x8mm.
