TBE-D5001-TRI-xxx
- SIL 3 HART® multiplexing Termination Board for Tricon & Tricon CX systems
G.M. International ISM0579-0
4
125 [4.
9”
]
29 [
1.1”
]
154 [6.
0”
]
125 [4.
9”
]
29 [
1.1”
]
154 [6.
0”
]
Models mounting and removing
Mounting:
To mount termination board on 35 mm DIN-Rail, hook one side of the mounting foot over
the rail’s lip and press the Termination Board down firmly until fixed (see Fig.1).
Removing:
To remove a termination board from the mounting rail, insert a blade screwdriver in the
mounting foot and lever (see Fig. 2).
Overall dimensions
For all termination boards TBE-D5001-TRI-xxx.
With 2 x Plastic DIN-Rail clips TBE-FIX-PL-001, with all dimensions are expressed in millimeters [inches]:
With 2 x Metal DIN-Rail clips TBE-FIX-MT-002, with all dimensions are expressed in millimeters [inches]:
Fig. 2
Pull the termination board upwards
and remove from DIN-Rail
For termination board with 2 x Plastic DIN-Rail clips TBE-FIX-PL-001:
Fig. 4
Pull the termination board upwards
and remove from DIN-Rail
Push to
engage
Fig. 3
73 [2.9”]
235 [9.3”]
12 [0.5”]
77 [
3.0”
]
58 [
2.3”
]
135 [5.
3”
]
73 [2.9”]
39 [1.5”]
39 [1.5”]
235 [9.3”]
77 [
3.0”
]
58 [
2.3”
]
135 [5.
3”
]
5 [0.2”]
Fig. 1
Push to
engage
Mounting:
To mount termination board on 35 mm DIN-Rail, hook one side of the mounting foot over
the rail’s lip and press the Termination Board down firmly until fixed (see Fig.3).
For termination board with 2 x Metal DIN-Rail clips TBE-FIX-MT-002:
Removing:
To remove a termination board from the mounting rail, insert a blade screwdriver in the
mounting foot and lever (see Fig. 4).
