GMI PSD1220, Инструкция по эксплуатации

Страница: 7 / 11

PSD1220 & PSD1220-098 - SIL 3 Power Supply, 24Vdc, 20 A, Zone 2, DIN Rail Mounting G.M. International ISM0370-3
7
Installation Procedure - 1st step: Installation on DIN-Rail into a cabinet of PSD1220 and PSD1220-098
The PSD1220 must only be installed on a DIN-Rail as oriented in the following drawing. All dimensions are in millimeters (mm).
Right side view
The PSD1220-098 must only be installed on a DIN-Rail as oriented in the following drawing. All dimensions are in millimeters (mm).
Right side view
Bottom side view
AC Input
DC Output
Fault contact
Current Sharing Bus
+ + – –
CSB
N L
Bottom side view
AC Input
DC Output
Fault contact
Current Sharing Bus
+ + – –
CSB
N L
RIGHT LEFT
Front view
UP
BOTTOM
PSD1220
Vout adjust trimmer
PWR On LED
RIGHT
LEFT
Front view
UP
BOTTOM
PSD1220-098
Vout adjust trimmer
PWR On LED
Not cover up-side output flows of air grid
Not cover down-side input flows of air grid
Not cover up-side
output flows of air grid
Not cover up-side output flows of air grid
Not cover down-side input flows of air grid
Not cover up-side
output flows of air grid