1OP1
0
30 – February 2018
Page 1
7
Operating Instructions & Function Tests
Shutdown Procedure
• When finished with the machine, place the platform in the stowed position.
• Park the machine on a level surface.
• Turn the Key Switch to the OFF position and remove the key to prevent
unauthorized use.
• Carefully exit the platform using a constant three (3) point dismount/grip.
• Push in the red Main Power/Lower Emergency Stop Switch button to the OFF
position when leaving the machine at the end of the work day.
• Charge the batteries.
Battery Charging
The charger surface can get hot while operating. Contact with the skin or surrounding materials should
be avoided.
To reduce the risk of an electric shock, connect only to a properly grounded single-phase (3 wire) outlet.
Do not use an external charger or booster battery.
Charge the battery in a well-ventilated area.
Use proper AC input voltage for charging as indicated on the machine.
Use only GMG authorized batteries and chargers.
IMPORTANT—
Be sure to disconnect the charger from the outlet before attempting to
operate the unit.
The charger will indicate the status of the charge cycle.
Battery Charger
Battery Charge
Location
1030-PA