Page 14
1OP1
0
30 – February 2018
Operating Instructions & Function Tests
Operating Instructions
Check the area above and around the machine for obstructions and electrical power lines before
operating the machine.
Emergency Stop
• Push in the red
Emergency Stop
button to
the off
position at the
ground controls or
the platform controls to stop all machine
functions.
• If any function operates when either red
Emergency Stop
button is pushed in,
repair
the
Emergency Stop
function before
using
the machine.
Emergency Lowering
If the control system fails while the platform is elevated, use the emergency lowering procedure to
safely lower the platform.
DO NOT climb down the scissor assembly or exit the platform.
The Emergency Lowering System is used to lower the platform in case of power failure.
• Pull the Emergency Lowering Handle to lower the platform.
Emergency
Stop Switch
15 A
Emergency
Stop Switch
1030-PA
