GMF OPTIMUS 400, Инструкция по сборке

Страница: 6 / 7

3. Setting the limit switches
The limit positions should be set after assembly by shifting and tightening the switching cams (2).
Limit switches (1) Switching cams (2)
4. Setting the friction clutch
The friction clutch is set as follows:
-
Untighten the lock nut (3) and tighten the adjusting screw (4) until the swing gate can be held still
manually.
-
Turning the adjusting screw (4) to the right increases the friction torque; to the left decreases the
friction torque.
-
After setting the friction clutch, tighten the lock nut (3) again.
In the meantime, the bolt should be held with a wrench (no. 13) so the set friction torque does not
change.
Lock nut (3)
Adjusting screw (4)
OPTIMUS 230V MONO - E - 30-07-18 6/7