GME GP450X, Инструкция по эксплуатации

Страница: 26 / 32

PAGE 26 INSTRUCTION MANUAL GP450X
6 . Choose
savE WPt/rtE
->
Pc
and press the
ENt
key .
7 . The savE WPt/rtE page is displayed . Press the ENt key
to continue .
8 . At the next window select yEs and press the ENt key .
9 . Data will be saved to your Pc .
uPloadING data from a Pc
1 . From the main menu, select
I/o sEtuP
and press the
ENt
key .
2 . Choose savE WPt/rtE -> Pc ? And press the ENt key .
3 . The load WPt/rtE page is displayed . Press the ENt key
to continue .
4 . At the next window select yEs and press the ENt key .
outPut data format, data sENtENcEs
NmEa 0183 version 2 .0
data1 : Current loop data with Waypoint (for connection to
another marine device ) .
With Waypoint
AP REM1 REM2
GLL GLL GLL
VTG GGA GGA
ZDA VTG VTG
AAM* ZDA ZDA
APB* RMC RMC
BOD* RMB* RMB*
BWC* BWC*
XTE*
(1s interval) (1s interval) (2s interval)
aP
= Autopilot .
rEm1
&
rEm2
= Radar, Fish Finder, etc .
data2: rs-232c level (for connection to a Pc or other
serial device)
With Waypoint
AP REM
GLL GLL
VTG GGA
ZDA VTG
AAM* ZDA
APB* RMV
BOD* RMB *
BWC * BWC *
XTE *
*No output when no Waypoint is set .
Data being saved . Press the eNT
key to cancel .
Saving is completed . Press any
key to exit .
Saving is completed . Press any
key to exit .
Data is being loaded . Press the
eNT key to cancel .
* No output when no Waypoint is set .