GME GP450X, Инструкция по эксплуатации

Страница: 13 / 32

GP450X INSTRUCTION MANUAL PAGE 13
8 . Select
EXIt
and press the
ENt
key to return to the route
list – or simply press the
mENu
key twice to return to your
navigation screen .
Note: When changing the Waypoint name, if you enter a name
that doesn’t exist in your Waypoint list, you will be asked to
either
crEatE a new Waypoint or rENamE the
current Waypoint .
Permanently deleting a Waypoint from a route
1 . Use the mENu key to access the main menu .
2 . Select
routEs
and press the
ENt
key .
3 . Select the route you wish to edit and press the ENt key .
4 . Highlight the Waypoint you wish to delete and press the
ENt
key . The route edit window appears .
5 . Select
rEmovE
from the route edit menu and press the
ENt
key .
6 . Press the mENu key twice to exit .
Inserting a Waypoint into a route
To insert a Waypoint into a route
1 . From the main menu select routEs .
2 . Select the desired route and press the ENt key .
3 . Select the Waypoint that will come AFTER the Waypoint you
are inserting and press the
ENt
key . For example, to insert
a Waypoint between Waypoints
ramP
and
001
in the
example below, select
001
and press
ENt
4 . The route edit window appears . Choose I NsErt and press
the ENt key .
4 . Use the cursor keypad to select the name of the Waypoint
you wish to insert . For example to insert a Waypoint called
markEr
use the or keys to change the character at
the cursor position to M . The Waypoint called
markEr
should appear .
5 . Press the ENt key . The new Waypoint will be inserted into
the route as shown below .
6 . Press the mENu key twice to finish .
temporarily skipping a Waypoint within a route
If required, you can temporarily skip a Waypoint from within a
route . In the example below Waypoint 002 has been skipped
causing the route to bypass that Waypoint . The Waypoint
remains in the route list but is not used in the route .
To skip a Waypoint;
1 . At the main menu select
routEs
and press the
ENt
key .
2 . Select the desired route and press the ENt key .
3 . Highlight the name of the Waypoint you wish to deselect and
press the ENt key .
4 . Select
skIP
from the Route Edit window and press the
ENt
key .
5 . X appears to the left of the skipped Waypoint . The route will
now bypass the skipped Waypoint .
6 . Press mENu twice to return to the navigation screen .
to restore the skipped Waypoint
1 . Repeat the steps above and select skP off from the Route
Edit Window at step 4, then press the ENt key .
2 . The Waypoint is now restored and will be included in the
route . Press mENu twice to exit .
route menu Window
route menu Window
Waypoint 002 is included in the route
Waypoint 002 has been skipped
CHANGE ?
REMOVE ?