GME g-radio GR300BT, Инструкция по эксплуатации

Страница: 8 / 21

8 INSTRUCTION MANUAL GR300BT
LOCAL/DX MODE
The Local/DX mode controls the receiver’s sensitivity. The GR300BT can be set to high
sensitivity for long distance reception (DX) or low sensitivity for local reception (LOC).
Selecting Local mode when using the AMS feature will help to reduce the strength
of distant weaker stations allowing only the stronger local stations to be stored in
memory.
To switch the Local mode on or off, briefly press the SEL key repeatedly until ‘LOC’
is displayed. Rotate the Control Knob right or left to enable or disable Local mode.
When enabled, the ‘LOC’ icon is visible on the display. If the ‘LOC’ icon is not visible,
the radio is in the DX mode.
When the GR300BT returns to the normal display mode, ‘LOC’ will be displayed if
Local mode is selected. If ‘LOC’ is not visible then DX mode is selected.
TUNING FOR STATIONS
Selecting USA or European Receiver Standards
The GR300BT supports USA and European standards for AM and FM frequency
bands. Australia and New Zealand conform to the European standard which is the
GR300BT’s default setting. Owners in the USA should select the USA standard.
To switch between standards, press and hold the BND key for 4 seconds.
The GR300BT will briefly display ‘E’ at the top of the LCD for European or ‘U’ for USA.
The ‘E’, ‘U’ symbol will disappear after a few seconds.
The differences between the European and USA bands are listed below.
COUNTRY BAND FREQUENCY STEP
European
FM 87.5 – 108 MHz ± 100 kHz
AM 522 – 1620 kHz ± 9 kHz
USA
FM 87.5 – 108 MHz ± 100 kHz
AM 530 – 1710 kHz ± 10 kHz
Select a Frequency Band
The GR300BT has 4 selectable frequency bands labelled AM1, AM2, FM1 and FM2.
Each band has 4 memories providing a total of 8 AM and 8 FM stations to be stored
for easy retrieval.
To select the desired frequency band briefly press the BND key. Each press will
advance to the next band in the sequence and the corresponding icon , ,
or will appear on the display to confirm your selection.
Manually Tuning the Frequency
Briefly press the or key to step upwards or downwards in frequency. The
frequency will be displayed on the LCD at each key press.