background image

12 

INSTRUCTION MANUAL 

GR300BT

Controlling your connected Media Device

While playing music through 

Bluetooth

®

, use the following keys on your GR300BT 

to control the music playback

 Press the   key to skip the current song and play the next song.

  Press the   key to step to the start of the current song. Press the   key again to 

step back to the previous song.

 Press the

 1 

key to Pause/Play the current song.

Bluetooth

®

 Range

Under normal conditions the 

Bluetooth

®

 range should exceed 10 meters, however 

if you move your smart phone or media player out of range of your GR300BT, the 

Bluetooth

® 

connection will eventually drop-out and your music player will pause.

AUXILIARY AUDIO INPUT

An auxiliary audio input lead with a 3.5 mm socket is fitted to the GR300BT rear 
panel to allow a direct audio connection from an external audio playback device or 
MP3 player. Connection is made using a 3.5 mm to 3.5 mm accessory lead. A suitable 
accessory lead (LE74) is available from your GME dealer.

To access the audio input, press the 

SRC

 key repeatedly until the ‘AUX’ icon appears. 

‘In’ will be displayed.

Note: 

If ‘- - - -‘ is displayed instead of ‘In’ when the AUX input is selected, the 3.5 mm 

accessory lead has not been connected.

INSTALLATION

NOTE: 

Your GR300BT is designed for connection to negative earth electrical  

systems only.

SELECTING A LOCATION

It is advisable to spend a little time selecting the best location for your GR300BT. 

The radio can be mounted to a shelf or panel using the supplied gimbal bracket. 

Alternatively it can be flush mounted using an optional flush mount kit.

Keep the following points in mind when choosing a location

  The GR300BT is designed to meet IPX7* standard. However we recommended you 

select a location that will minimise excessive exposure to continuous rain or spray.

  Select a location that won’t expose your radio to continuous direct sunlight which 

could cause overheating.

  Ensure the location allows a free flow of air around the heat sink on the back of 

the radio.

  Components and currents in the radio create magnetic fields. To avoid interference 

to compasses, ships autopilot sensors etc, the GR300BT should be mounted at least 
300 mm from such devices.

Содержание g-radio GR300BT






















Отзывы: