background image

INSTRUCTION MANUAL 

GR300BT

Note: 

The time setting will be retained as long as the 12V power source remains 

connected. If the 12V power source is disconnected, the time setting will be lost and 
will need to be readjusted once the power is restored.

Selecting 12 or 24 Hour Mode

1. Press and hold the 

SEL

 key. ‘CL XX’ is displayed where XX is the clock setting.

2. Rotate the 

Control Knob

 left or right to make your selection.

 

(i) Select ‘CL 24’ to display a 24 hour clock.

 

(ii) Select ‘CL 12’ to display a 12 hour clock.

 

(iii)  Select ‘CL OF’ to disable the time display whenever the GR300BT is switched 

off (the time display is still available when the GR300BT is switched on).

The radio will return to the normal display after a few seconds

Note: 

If the 12 hour clock option is selected, ‘A’ for AM or ‘P’ for PM will be displayed 

directly above the time.

KEY BEEPS

The GR300BT normally provides a confirmation beep whenever a key is pressed.  
If preferred, the beep can be disabled. To disable the beep;

1. Press and hold the 

SEL

 key. ‘CL XX’ is displayed where XX is the clock setting.

2. Briefly press

 SEL

 again to access the Beep setting. ‘BEEP’ is displayed.

3. Rotate the 

Control Knob

 left or right to enable or disable the key beep.

 

(i) Select ‘BEEP’ to enable the key beeps.

 

(i) Select ‘OFF’ to disable the key beeps.

The radio will return to the normal display after a few seconds

ADJUSTING THE SOUND

Volume

During normal use the 

Control Knob

 will default to the volume mode.

To adjust the volume, rotate the 

Control Knob

 to the right to increase the volume or 

to the left to decrease the volume. The volume level is displayed on the LCD in values 
from 0 (min) to 30 (max)

Bass

To adjust the Bass, briefly press the 

SEL

 key until the 

 icon is displayed. Rotate 

the 

Control Knob

 to the right to increase the Bass or to the left to decrease the 

Bass. The selected setting will be displayed on the LCD in values from -10 (min) to 
+10 (max). For a flat bass response, select 0.

Содержание g-radio GR300BT






















Отзывы: